Phantom PHENO 440 LED 440W 100-277V MP Spectrum Phantom LED

Phantom PHENO 440 LED, 440W, 100-277V, MP Spectrum

The Phantom PHENO 440 horticultural lighting system combines high photon flux with superior efficiency. The low-profile design and wide voltage range is ideal for a wide range of applications. Two adjustable light bars allow the user to adjust light spread. An integrated output knob provides control over the number of photons to the plant canopy.

Suitable for both flowering and vegetative stages, the Multi-Phase (MP) spectrum provides ideal red to blue ratio for vigorous growth and to maximize flower development.

 

Features

• 1100 μmol/s PPF @277V
• 2.5 μmol/joule PPE @277V
• 440W, 100-277V Driver
• High-efficiency Multi Phase spectrum
• Integrated flux control knob
• Compact sized: 31.49″x 16.8″ x 4.1″
• Net Weight: 19.4lbs/ 8.8kg
• Includes 10′ 120V power cord
• DLC listed (H-LORIQO2) and qualifies for utility rebates, which play a significant role in optimizing the cost effectiveness of a lighting project

Cut sheet

 

The Phantom PHENO offers the functionality of an on board dimming knob, allowing the grower to adjust the photon output intensity to accommodate the various stages of plant growth for optimal photosynthesis activation. With the knob adjusted to 100%, the PHENO uses 440W and puts out 1100 μmol/s photon flux (PPF). With the knob adjusted to 40%, the PHENO uses 176w and puts out 40% of the photon flux. The Multi-Phase spectrum does not change when using the dimmer knob and still provides ideal red to blue ratio for vigorous growth and to maximize flower development.

 

KNOB POSITION	CONDITION/NOTES	PHOTON FLUX (µmol/s)	AVERAGE POWER (WATTS)
EXT	SWITCH THE KNOB TO THIS FOR USE WITH 0-10V CONTROLLER	VARIABLE	VARIABLE
OFF	NO LIGHT EMMITTED	0 µmol/s	0W
100%	100% OF TOTAL LIGHT EMMITTED	1100µmol/s	440W
80%	80% OF TOTAL LIGHT EMMITTED	880 µmol/s	352W
60%	60% OF TOTAL LIGHT EMMITTED	660 µmol/s	264W
40%	40% OF TOTAL LIGHT EMMITTED	440 µmol/s	176W

 

 

Spectrum

 

 

 

PPFD

NOTE: Photosynthetic Photon Flux Density (PPFD) data is produced by using professional lighting simulation software and third party laboratory photometric files. All PPFD data are measured in  µmol/m2/s. The result assumes a single fixture being mounted in a 4’x4′ grow tent with 85% wall reflectance. Actual measurement may vary depending on actual use conditions, input voltages, and measuring instruments. Professional lighting plans for commercial applications are available upon request.

 

 

 

Specs

Model: PHL440LMP

Fixture Type: High-Efficiency Horticultural LED

Spectrum: MP Spectrum

Typical Photon Flux Output: 1100 µmol/s

Input Power: 440W

Efficacy: 2.5 µmol/j

Input Voltage Range: 100–277V

Lifetime: Q90: >50,000hr

Optics: 120° Primary Optics

Dimmable: 0–10V

Frequency: 50/60hz

Driver: IP67 Driver (output compensating)

Operating Environment: Wet Location

Ingress Protection Rating: IP65

Weight: 47.5 lbs

Dimensions: 44″ x 43.30″ x 1.78″

• A (1) Phantom PHENO 440 LED Lighting System
• B (1) 120V Power Cord
• C (1) Mounting cable and carabiner
• D (1) RJ11 Cable
• E (2) V Hangers
• (1) Instruction (not shown)

Warranty: 5 Years